Trenchless methods have changed the way homeowners think about repairing their sewer lines. Everyone is opting for the technique that will save them time and money and that is the definition of trenchless. The trenchless method is a easier way to repair sewer lines. It doesn’t require the use of heavy machinery to dig trenches, it requires a smaller amount of time to finish, and it also saves money. Before trenchless became popular, homeowners were having to have their properties dug up with backhoes, in order to reach the pipes underground. This meant damage and destruction to yards that were an eyesore and it turned yards into contruction zones until the work was completed. Trenchless has changed the way things are done, saves the homeowner money, and cuts the time down on these projects.

The trenchless method is not one set way of doing repairs because no two pipes are going to have identical problems. Therefore, there are different ways that trenchless can be performed but two of the more common version are pipe lining and pipe bursting. Pipe lining is a process where a lining covered in resin is placed into the old pipe. It then adheres to the old pipe, thus creating what is known as a “pipe in a pipe”. This gives the homeowner a new pipe and the lining has been known to last up to 50 years. Pipe bursting is done a little different. This requires completely replacing the old pipe by bursting it. A new pipe goes into the old pipe and at the same time, it bursts the old pipe. This gives you a brand new pipe that doens’t require lots of digging.

If you are a homeowner whos pipe has been inspected and it is determined that you will need a whole new pipe, here are some reasons to choose pipe bursting:

1. Less damage to your property

Pipe bursting only requires digging to be done on each end of the pipe you are bursting. This means the rest of your land will not be disturbed and you don’t have to worry about those pesky trenches.

2. The price will be cheaper

Pipe bursting doesn’t require a full crew or heavy equipment to complete so this means you will not spend as much money out of pocket.

3. The time is much faster

Pipe bursting is a fast and effective way to replace an old pipe and in some cases, it can take as little as 24 hours to complete. This means that your daily routine won’t be disrupted for long and once they are gone, you will have a new pipe that should last for years to come.

4. You won’t have to worry about the pipe for years

Pipe bursting gives you a new, up to date pipe that won’t corrode like some of the materials in the past. You will have a seamless pipe. This means that the pipe will have no areas that can allow tree roots to get in and potentially cause blockages over time. With less room for damage to be done, the pipe will last you a very long time.

Leave a Reply

Your email address will not be published. Required fields are marked *